Ultra-Modern Stainless Steel Professional Magnetic Knife/Tool Bar Holder (Installation Instructions)

Carefully pull the stainless steel mounting plate off the back of the knife/tool bar using the attached plastic tabs. (Be careful, as the mounting plate comes already attached to the strong magnets in the bar.)
Peel off the plastic tape from the mounting plate and keep it away from the strong magnet of the knife/tool bar. Don’t let them snap back together.
Measure the spacing between the two screw holes on the mounting plate and make appropriate pencil marks on the wall you want to mount it on. Use a level if necessary.
Drill two holes into the wall using your pencil marks and insert one plastic wall anchor into each hole. (Two plastic wall anchors are provided)
Align and screw the mounting plate into the wall via the two plastic wall anchors using the two screws provided.
Carefully align and place the back of the knife/tool bar holder onto the stainless steel mounting plate. Again, use caution as the magnets in the knife/tool bar holder are extremely strong.